Hello everyone. Ive been messing with this James Bond pinball machine for a while. It started with the power board giving me around 12v. where I should only be getting 8. Also had no 42v or 60v output. So I ordered the power supply rebuild kit from Big Daddys. Put the majority of everything in like the new transistor, capacitors, some diodes, and resistors, new 5v. pot, and chips, minus a few resistors and diodes that checked out ok. Now when I power it up, Im getting my 5v., 8v. which is good. But now the 42v. is giving me 60v. and the 60v. is putting out 81v. I did notice also resistor R1 and R5 are getting hot.
Ive highlighted the resistors that are getting hot.